Part Number:
ETI0003-1001
Model:
ETI0003-A/20/120
Rugged Rackmount Power Distribution Unit
with UPS Interface and Remote Control
Navy TAMPS,SPAWAR Standard Product
Rugged Power™
ETI0003-AConfiguration with UPS Interface
20 Amp Rugged Rack Mount PDU w/ 4 Circuit, 2 Pole,
Intelligent, Solidstate Controls and Remote Control Panel
Safety, Thermal and UPS Interlocks
ETI0003-A/20/120 Standard Front Panel Layout
ETI0003-A/20/120 Standard Rear Panel Layout
ETI0003-A Remote Control/DisplayPanel.
The field proven Rugged Power Power Distribution Unit (PDU) line is ideally suited for military, industrial and telecommunicationsapplications requiring a rugged rack, vehicular or field deployable, high reliability, compact sizeand light weight design. The heavy-duty chassis occupies only 2U (3.5) ofrack space while controlling up to 2400 VA of power via four double polecontrols. Therounded metal corners and rugged handles aid in safehandling. Internally, all major components are well secured and electricallyinsulated to prevent damage due to shock and vibration. All controlsand protective devices are brought to the front panel with critical switches orbreakers guarded. Further, all front panel devices are recessed to preventdamage or accidental operation. Thedisplay/control panel contains individual control switches, alarm silenceswitch and alarm LEDs.
The LEDarrays keep the operator informed as to the unit's status. An alarm will flashits respective LED until acknowledged. Once the alarm reset is pressed, the LEDwill remain on steady until the alarm is cleared. The intelligent PDU allows control ofthe individual output circuits incorporating thermal and interlock interfacesfor additional control and safety, plus Battleshort override. Each loadcan have an external interlock toturn off power to equipment when it is not fully engaged in the rack or becomesoverheated. The rack may be equipped with both a thermal warning and a thermal shutdown sensor that thePDU uses to alarm and shut down all the loads to avoid damage or thermalrunaway. A Battleshort signalwill override both the thermal and interlock signals. An external CPU Fail orauxiliaryalarm signal can also brought in to annunciate. The display andcontrol panel can be mounted remotely in the rack, or on the keyboard console,or on the unit front panel with only a logic level cable connection. The high intensity audible alarm can be heard in high noiseenvironments, yet is easily adjustable to suit quieter conditions. The double pole inputbreaker provides overload and short circuit protection for the connected UPS inputisolation transformer and rack fans. TheEmergency Power Off (EPO) function will remotely open the input circuit breaker.The PDU circuit breaker on/off operation is also interlocked to control the UPS on/offfunction as well. Power from the UPS is brought back to the PDU to bedistributed to the loads. Eachload is controlled by a double pole solidstate relay avoiding accidentaloperation due to shock or vibration. The elapsed time hour meter tracks therack equipment operation for maintenance.
Therear panel provides locking connectors for the input power, output power, alarmand control signals. Appropriate jumper plugs are available for options notused in a particular rack system.
Overall, the Rugged Power product line is uniquely qualified for critical shipboard,vehicle, airborne or land based systems combining advanced modular designfeatures with highly reliable construction.
Technical Specifications
AC INPUT FROM RACK | |
PDU input from rack: | 120 VAC nominal, optional up to 600 VAC |
INPUT MAIN (J1) connection: | AMP CPC Type XII, 7 pin locking |
Input control/protection: | Guarded 2 pole, 20 amp circuit breaker |
Input power indicator: | Green neon lamp |
AC OUTPUT TO UPS | |
PDU output to UPS: | Same as input from rack |
AC TO UPS (J2) connection: | AMP CPC Type XII, 3 socket reverse, locking |
AC INPUT FROM UPS | |
PDU input from UPS: | 120 VAC, 60 Hz nominal, standard UPS |
AC FROM UPS (J3) connection: | AMP CPC Type XII, 3 pin locking |
AC OUTPUT TO FANS | |
PDU output to fans: | Same as input from rack |
AC TO FANS (J4) connection: | AMP CPC Type XII, 3 socket reverse, locking |
POWER DISTRIBUTION | |
PDU output voltage to loads: | 120 VAC, 60 Hz nominal, standard UPS |
Output rating to loads: | Limited to lesser of 20 amps or UPS rating |
Output circuits: | Four controlled outputs w/2 pole ss relays |
LOADs (J5-J8) | IEC-320-F w/cable restraint standard |
THERMAL CONTROL | |
Control function: | Two stage thermal warning and shutdown |
THERMAL CONTROL (J9): | AMP CPC Type III, 9 pin locking |
INTERLOCK CONTROL | |
Control function: | Microswitches sense each equipment position Disconnects power to load when racked out |
INTERLOCK (J10) connection: | AMP CPC Type III, 16 pin locking |
REMOTE CONTROL | |
Output control/alarm silence: | Local/remote control panel w/rocker switches |
Operational status: | LEDs for LOW BATT, AC FAIL, WARM, HOT, CPU Adjustable +90 dB audible alarm |
REMOTE CONTROL (J11) connection: | DB-25 female with locking mount |
UPS INTERFACE | |
Control function: | AC Fail & Low Battery signals, UPS on/off control |
UPS (J12) connection: | DB-9 male with locking mount |
CPU INTERFACE | |
Control function: | Brings in Battleshort and CPU Fail signals |
CPU (J13) connection: | DB-9 female with locking mount |
MECHANICAL | |
Dimensions ( H x D x W ): | 3.5 (2U) x 12.0 x 19.0 in (893x305x483mm) |
Rack Slide Mount Patterns: | Slides or rear support mounting brackets |
Alternate Mounting Options: | Table, Wall, Floor, Portable, Horizontal/Vertical |
Shipping weight: | 20 lb. (9.1 kg) with lift handles front |
Audible noise: | Less than 47 dB @ 5.0 ft., ANSI "A" scale |
Cooling type: | Convection cooling |
ENVIRONMENTAL | |
Storage temperature: | -13° to 140° F ambient (-25° to 60° C ) |
Operating temperature: | 32° to 122° F ambient (0° to 50° C ),higher optional |
Operating humidity: | 0 to 95% relative humidity (non-condensing) |
Operating elevation: | Up to 15,000 ft (4,572 m), higher optionally |
STANDARDS | |
United States: | Meets UL-1778 standard, MIL STDs 901, 167 & 1399 Shock/Vib/Electrical |
Canada: | CSA C22.2 No. 107 safety requirements |
EMI Protection: | EMI/RFI FCC, Class B, MIL STDs 461 |
OPTIONAL ACCESSORIES | |
Dual Source Input, EMI Insertion Loss Filters, Auxiliary DC Power Supply, MS Connectors, Transient Surge Suppression, Load Sequencing |